IDS-R13MP
13.56 MHz RFID Reader
Multi-Protocol Including ISO 14443, ISO 15693, and EPC
Description:
The IDS-R13MP is an integrated analogue front end and data framing system for 13.56MHz RFID reader systems. The built-in programming options make it suitable for a wide range of applications both in proximity and vicinity RFID systems.
The reader configuration is achieved by selecting the desired protocol in the control registers. The direct access to all control registers also allows fine-tuning of different reader parameters if needed.
Key Features:
- Supply voltage range 2.7 to 5.5V
- Protocols: ISO/IEC 15693, ISO 14443A/B and HF EPC
- Antenna driver using OOK or ASK
- Dual receiver input providing both AM and PM demodulation avoiding communication holes
- Reception automatic gain control
- 3.3V voltage regulator providing up to 20 mA for external MCU
- High output power (100 or 200 mW) from single 5V supply
- Significant increase of PSRR through on-chip RF output supply regulator
- Reader to reader anti-collision
- Power-down, standby and active mode
- Temperature range: -40°C to 110°C
Applications:
- Proximity systems
- Vicinity systems
- HF EPC systems
- High bit rate proximity systems
Package:
32-pin QFN (5 x 5mm)
|
|
